top of page

OxyCheq - MACH V Chroma Series Wing - Purple

Colours:    Neon Pink, Mariner Blue, Lime, Red, Orange, Sunshine Yellow, Purple

MACH V Signature Series Wing

The MACH V Chroma Series Wing for Singles. The extremely low profile produces less drag in the water. The Mach V has integrated role control devices eliminating the need for a single tank adapter. Inflator hose elbow is off center so it will not interfere with the first stage regulator. Complete with roll control so you will not have to use an STA (Single Tank Adapter) with a OxyCheq backplate. Easy access to bladder via a 360 degree zipper.

 

Sizes

 

18#, 30#, 40#

Recommended Use

  • Travel

  • Warm Water

  • Adolescent Divers

Design

18#

  • Design: 

  • Outer Shell: 

  • Inner Bladder: 

  • Lift: 

  • Size: 

  • Weight: 

  • Embroidery: 

30#

  • Design: 

  • Outer Shell: 

  • Inner Bladder: 

  • Lift: 

  • Size: 

  • Weight: 

  • Embroidery: 

40#

  • Design: 

  • Outer Shell: 

  • Inner Bladder: 

  • Lift: 

  • Size: 

  • Weight: 

  • Embroidery: 

 

360

1000 Denier Cordura with 5 ounces of Urethane

26.5 Mil (thicker than water bed)

18 Pound ~ 8.2 Kilograms

Approximately 11.5" wide x 22 " tall at full inflation ( 29cm x 55cm)

2lbs 1oz. / .935 kg

Gold "OXYCHEQ" embroidery on side

360

1000 Denier Cordura with 5 ounces of Urethane

26.5 Mil (thicker than water bed)

30 Pound ~ 13.7 Kilograms

Approximately 13.5" wide x 23 " tall at full inflation ( 34cm x 58cm)

2 lb 7 oz / 1.1 kg

Gold "OXYCHEQ" embroidery on side

360

1000 Denier Cordura with 1 ounces of Urethane

26.5 Mil (thicker than water bed)

40 Pound ~ 18.2 Kilograms

Approximately 11.5" wide x 22 " tall at full inflation ( 29cm x 55cm)

2lbs 9oz. / 1.18 kg

Gold "OXYCHEQ" embroidery on side

Part Number(s)

OW-08-18PP, OW-08-30PP, OW-08-40PP

Caution

Your BC should be used only after proper instruction on the use of buoyancy control devices has been completed. I has been designed to control your buoyancy when it is negative or positive. to make your dive easier and more comfortable. A buoyancy compensator is not a life jacket or substitute for proper swimming skills

Care & Maintenance

  • After Pool or Saltwater use a BC should be thoroughly inside and out with fresh water. Salt crystals can build up inside a BC and can cause damage to the bladder and or shell over time. You do not need to take of the OPV or elbow to flush with fresh water.

    • Using a hose, place it to the mouth piece on the inflator valve and press the manual inflation button completely to let water from the hose enter.

    • DO NOT FILL THE WING COMPLETELY WITH WATER - Only a small amount of water is needed.

    • Release the inflator valve and manually add air via the mouth piece or LP inflator hose to fill the wing with air.

    • Shack the water around the inside of the wing.

    • Dump the water out the OPV and Manual Inflator Valve & LP Inflator connector.

    • Repeat at least three time.. more may be needed depending on the diving environment.

Drying

  • When drying, avoid prolonged exposure to the sun or against harmful UV.

Storage

  • Before storing the BC, ensure it is dry.

  • Slightly Inflate.

  • Store in a cool dry place.

bottom of page