BUOYANCY - OXYCHEQ
OxyCheq analyzers and diving equipment are used by a variety of government agencies, the US Military, industrial, safety, major universities, dive shops, dive boats, technical divers and anything in between.
BUOYANCY - OXYCHEQ
OxyCheq analyzers and diving equipment are used by a variety of government agencies, the US Military, industrial, safety, major universities, dive shops, dive boats, technical divers and anything in between.
BUOYANCY - OXYCHEQ
OxyCheq analyzers and diving equipment are used by a variety of government agencies, the US Military, industrial, safety, major universities, dive shops, dive boats, technical divers and anything in between.
MACH V Extreme Series Wing
The MACH V Extreme Series Wing for Singles with Armored Extreme Explorer Fabric. The low profile produces less drag in the water. The extreme series wing provides the greatest puncture and abrasion resistance than any wing we have made.
Puncture and abrasion protection is provided by the tiny, hard guard plates that are adhered to conventional and non-conventional base fabrics. Because the gap between guard plates is very small, it provides high levels of protection from sharp pointed objects and abrasion. The fabric was originally designed for protection against hypodermic needles in the medial field. Complete with roll control so you will not have to use an STA (Single Tank Adaptor) with a OxyCheq backplate. Easy access to bladder via a 360 degree zipper.
Sizes
18#, 30#, 40#
Design
18#
-
Shape:
-
Outer Shell:
-
Inner Bladder:
-
Lift:
-
Weight:
-
Size:
30#
-
Shape:
-
Outer Shell:
-
Inner Bladder:
-
Lift:
-
Weight:
-
Size:
40#
-
Shape:
-
Outer Shell:
-
Inner Bladder:
-
Lift:
-
Weight:
-
Size:
360 degree Donut
Extreme Explorer Armored Fabric
26.5 Mil (thicker than water bed)
18 Pound ~ 8.2 Kilograms
2 lbs 6 oz. / 1.08 kg
Approximately 11.5" wide x 22 " tall at full inflation ( 29cm x 55cm)
360 degree Donut
Extreme Explorer Armored Fabric
26.5 Mil (thicker than water bed)
30 Pound ~ 13.7 Kilograms
3 lbs 9 oz. / 1.63 kg
Approximately 13.5" wide x 23 " tall at full inflation (34cm x 58cm)
360 degree Donut
Extreme Explorer Armored Fabric
26.5 Mil (thicker than water bed)
40 Pound ~ 18.2 Kilograms
3 lbs 12 oz. / 1.7 kg
Approximately 14" wide x 24 " tall at full inflation (35.5cm x 61cm)
Part Number(s)
OW-07-18, OW-07-30, OW-07-40
Caution
Your BC should be used only after proper instruction on the use of buoyancy control devices has been completed. I has been designed to control your buoyancy when it is negative or positive. to make your dive easier and more comfortable. A buoyancy compensator is not a life jacket or substitute for proper swimming skills
Care & Maintenance
-
After Pool or Saltwater use a BC should be thoroughly inside and out with fresh water. Salt crystals can build up inside a BC and can cause damage to the bladder and or shell over time. You do not need to take of the OPV or elbow to flush with fresh water.
-
Using a hose, place it to the mouth piece on the inflator valve and press the manual inflation button completely to let water from the hose enter.
-
DO NOT FILL THE WING COMPLETELY WITH WATER - Only a small amount of water is needed.
-
Release the inflator valve and manually add air via the mouth piece or LP inflator hose to fill the wing with air.
-
Shack the water around the inside of the wing.
-
Dump the water out the OPV and Manual Inflator Valve & LP Inflator connector.
-
Repeat at least three time.. more may be needed depending on the diving environment.
-
Drying
-
When drying, avoid prolonged exposure to the sun or against harmful UV.
Storage
-
Before storing the BC, ensure it is dry.
-
Slightly Inflate.
-
Store in a cool dry place.